Fusion Splicer

Features：
Fiber core can be display clearly
Single x or y view and x & y view simultaneously
Auto check quality of cleaved end face
Auto select best splicing program
9 seconds splice time and 30 seconds heat time
Small bulk and light weigh
5 inch color lcd monitor with clear digital image display
Simple operation menu
Specifications：
Model st3100
Applicable fibers sm (itu-t g.652), mm (itu-t g.651), DS (itu-t g.653), nzds (itu-t g.655)
Fiber cleaved length 8 ~16mm (Coating diameter: 250µm)
Fiber diameter Cladding diameter: 80 ~150µm , Coating diameter: 100 ~1000μm
Fiber Count Single
Fiber aligning method Core aligning
Average splice loss 0.02dB (sm), 0.01dB (mm), 0.04dB (DS), 0.04dB( nzds)
Splicing time Typical 9 sec，with standard sm fiber
Splicing program 12(templet), 188(user)
Storage of splice result 5000 results 3 parameter per result
Fiber image magnification 400x （x or y view），200x (x and y view)
Heating time Typical 30 sec
Heating program Heating time can be adjusted
Applicable sleeves 60mm, 40mm and a series of micro sleeves
Tension test 2n
Electrode life 2500
Battery capacity Typical 160 cycles (splice and heat)
Monitor 5 inch color lcd monitor
Terminal rs232
Operating condition 0 ~ 5000m above sea level, 0 ~ 95%rh and -10～50℃, respectively, Max. wind velocity of 15m/s
Power supply ac 100-240v with ac adapter; inner Li-battery(8000mAH)
Dimension 150mm(l) 150mm (w) 160mm (h)
Weight 3.52 Kg including battery