Contactar

Optical Fiber Cleaver

$ 250 /unidad
IVA no incluido
Tiempo de entrega: 10 días
Envío a: Todo el mundo
Descripción de

Optical Fiber Cleaver

:
i. Specification
St3110c Optical Fiber Cleaver
Suitable fiber Single fiber
Coating diameter 0.25mm&0.9mm
Cladding Diameter 125um
Cleaving length 9~16mm( 0.25mm)
10~16mm( 0.9mm)
Cleaving angle 0.5°
Blade life 36000 times
Weight Approx. 430g
Dimension 63(w ) x 84( d ) x 63( h ) mm
Ii. Structure:


Iii. Operating Procedures
1. Open the top clamp lever and the lid of the single fiber adapter. The blade carriage should be in the forward position.

2. Lower the fiber straight into the correct v-groove with the end of the fiber coating (e.g. if the cleave length is 16mm) at the 16mm mark on the ruler.

3. Close the lid of the single fiber adapter.
4. Lower the top clamp lever. Slide the blade carriage to the rear of the cleaver. The fiber will be cleaved.

5: Open the top clamp lever. Then open the lid of the single fiber adapter and lift the newly cleaved fiber. Lift the off-cut and dispose it properly.


Iv. Ordering Information
Standard Accessory
Optical Fiber Cleaver with off-cut collector 1 pc
Carrying Case 1 pc
Operation Manual 1 pc
Optional Accessory
Replacement Blade 1 pc
China Optical Fiber Cleaver ST3110C senter telecommunication
ID producto: 1410434 | Referencia: ST3110C | Vendido por: Shandong Senter Electronic Co.,Ltd
Fecha de alta del producto 01/06/2013 - Modificado por el vendedor 01/06/2016
Productos relacionados con

Optical Fiber Cleaver